You are here:Home > Cruiser/V-Twin Parts > Body Parts & Accessories > Bullet Fairings
Find by Brand
Sort By:
Page of 1
Honda VT750C2B Shadow Phantom '10-'13 Bullet Fairings Yamaha XVS1300 Stryker '11-'18 Bullet Fairings Honda VT750DC/C2 Shadow Spirit '05-'14 Bullet Fairings

Memphis Shades Batwing Fairing

The Memphis Shades Batwing Fairing has a clean, aerodynamic shape that will enhance the style and comfort of your ride!

Features:

  • 36 1/2" Wide x 16 1/2" Tall
  • Inner fairing is black textured ABS and outer shell is opaque black Lucite with a Class A finish that looks great as is or can be painted easily
  • To mount this fairing, you will need to separately purchase a mounting kit and a windshield or spoiler windshield, sold separately
  • Made in the USA

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

  • Angle Adjustable
  • Model specific no-hassle installation, then on-of with tools.
  • A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.
  • Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.
  • Anchoring hardware is the same for all windshields and fairings for each bike.
  • Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”.

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Honda VT750DC/C2 Shadow Spirit '01-'03 Bullet Fairings Honda VT1300CR Stateline '10-'16 Bullet Fairings Honda VT1300CS Sabre '10-'14 Bullet Fairings

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Memphis Shades Batwing Fairing

The Memphis Shades Batwing Fairing has a clean, aerodynamic shape that will enhance the style and comfort of your ride!

Features:

  • 36 1/2" Wide x 16 1/2" Tall
  • Inner fairing is black textured ABS and outer shell is opaque black Lucite with a Class A finish that looks great as is or can be painted easily
  • To mount this fairing, you will need to separately purchase a mounting kit and a windshield or spoiler windshield, sold separately
  • Made in the USA

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

  • Angle Adjustable
  • Model specific no-hassle installation, then on-of with tools.
  • A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.
  • Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.
  • Anchoring hardware is the same for all windshields and fairings for each bike.
  • Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”.

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Honda VT1300CXA Fury '10-'17 Bullet Fairings Honda VTX1300C '04-'09 Bullet Fairings Honda VTX1300R '03-'09 Bullet Fairings

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Memphis Shades Batwing Fairing

The Memphis Shades Batwing Fairing has a clean, aerodynamic shape that will enhance the style and comfort of your ride!

Features:

  • 36 1/2" Wide x 16 1/2" Tall
  • Inner fairing is black textured ABS and outer shell is opaque black Lucite with a Class A finish that looks great as is or can be painted easily
  • To mount this fairing, you will need to separately purchase a mounting kit and a windshield or spoiler windshield, sold separately
  • Made in the USA

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

  • Angle Adjustable
  • Model specific no-hassle installation, then on-of with tools.
  • A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.
  • Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.
  • Anchoring hardware is the same for all windshields and fairings for each bike.
  • Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”.

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Honda VTX1300S '03-'09 Bullet Fairings Honda VTX1800C '02-'08 Bullet Fairings Honda VTX1800C '02-'08 Bullet Fairings

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Kawasaki VN900 Vulcan Custom '07-'18 Bullet Fairings Yamaha XVS650 V-Star Custom '98-'18 Bullet Fairings Yamaha XVS1100 V-Star Custom '98-'15 Bullet Fairings

Memphis Shades Batwing Fairing

The Memphis Shades Batwing Fairing has a clean, aerodynamic shape that will enhance the style and comfort of your ride!

Features:

  • 36 1/2" Wide x 16 1/2" Tall
  • Inner fairing is black textured ABS and outer shell is opaque black Lucite with a Class A finish that looks great as is or can be painted easily
  • To mount this fairing, you will need to separately purchase a mounting kit and a windshield or spoiler windshield, sold separately
  • Made in the USA

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

  • Angle Adjustable
  • Model specific no-hassle installation, then on-of with tools.
  • A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.
  • Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.
  • Anchoring hardware is the same for all windshields and fairings for each bike.
  • Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”.

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Yamaha XV1700 Road Star Warrior '02-'10 Bullet Fairings Yamaha XV1900 Raider '08-'18 Bullet Fairings Yamaha XV1900 Raider S '08-'18 Bullet Fairings

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”

Memphis Shades Batwing Fairing

The Memphis Shades Batwing Fairing has a clean, aerodynamic shape that will enhance the style and comfort of your ride!

Features:

  • 36 1/2" Wide x 16 1/2" Tall
  • Inner fairing is black textured ABS and outer shell is opaque black Lucite with a Class A finish that looks great as is or can be painted easily
  • To mount this fairing, you will need to separately purchase a mounting kit and a windshield or spoiler windshield, sold separately
  • Made in the USA

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

  • Angle Adjustable
  • Model specific no-hassle installation, then on-of with tools.
  • A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.
  • Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.
  • Anchoring hardware is the same for all windshields and fairings for each bike.
  • Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”.

Memphis Shades Bullet Fairing

Bold aerodynamic shape with a hint of outlaw styling designed to streamline today's low-slung cruisers

Extends back just over the handlebars and measures about 16" front to back, 17˝" side to side, and 18" top to bottom.

Provides full torso coverage to virtually eliminate wind fatigue while allowing an unobstructed view of the countryside; your head is in clean air.

Dark black translucent color and made of durable Lucite L, the Bullet Fairing looks great as is or can easily be painted: simply mask off the "windshield" area for a factory power cruiser look.

Made in the U.S.A. - Made in Memphis!

Trigger-Lock Mounting Hardware

The revolutionary Trigger-Lock mounting hardware features an innovative system that allows you to quickly and easily remove your windshields without the use of any tools. Each kit is model specific and custom-fit to each style of bike for a truly no-hassle installation.

Angle Adjustable

Model specific no-hassle installation, then on-of with tools.

A pair of glass-filled nylon latches lock it down until the spring loaded "Trigger-Locks" are intentionally disengaged.

Guaranteed never to rust or tarnish. Made exclusively of electrocoated aluminum and stainless steel, with stainless steel fasteners.

Anchoring hardware is the same for all windshields and fairings for each bike.

Made in the U.S.A. - Made in Memphis!


Trigger-Lock Mount Kits vs Plates Only Kits

Trigger-Lock Mounting Kits consist of anchoring hardware (the part that stays on the bike), and mounting plates (the part that connects the fairing or windshield to the bike). “Plates Only” kits can be use when you already have Memphis Shades Trigger-Lock anchoring hardware on your bike. For example, if you already run, say, a Gauntlet fairing, you could mount a windshield or another fairing using “Plates Only”